BASE FLOW RECESSION RATES,LOW FLOWS,AND HYDROLOGIC FEATURES OF SMALL WATERSHEDS IN PENNSYLVANIA,USA1

This paper examines the relationships between measurable watershed hydrologic features, base flow recession rates, and the Q_7,10 low flow statistic (the annual minimum seven‐day average streamflow occurring once every 10 years on average). Base flow recession constants were determined by analyzing hydrograph recession data from 24 small (>130 km²), unregulated watersheds across five major physiographic provinces of Pennsylvania, providing a highly variable dataset. Geomorphic, hydrogeologic, and land use parameters were determined for each watershed. The base flow recession constant was found to be most strongly correlated to drainage density, geologic index, and ruggedness number (watershed slope); however, these three parameters are intercorrelated. Multiple regression models were developed for predicting the recession rate, and it was found that only two parameters, drainage density and hydrologic soil group, were required to obtain good estimates of the recession constant. Equations were also developed to relate the recession rates to Q_7,10 per unit area, and to the Q_7,10/Q₅₀ ratio. Using these equations, estimates of base flow recession rates, Q_7,10, and streamflow reduction under drought conditions can be made for small, ungaged basins across a wide range of physiography.     

固相萃取-高效液相色谱法测地表水中11种酚类化合物

建立了固相萃取-高效液相色谱法同时测定地表水中11种酚类化合物的方法。水样经过全自动固相萃取仪富集,以HLB柱为萃取柱,乙腈(含1%乙酸)为洗脱剂,用高效液相色谱仪分析定量。该方法在0.5~5.0 mg/L范围内线性良好,相关系数为0.999 6~0.999 9,11种酚类化合物的纯水加标回收率为82.0%~111%,地表水加标回收率为98.5%~116%,精密度为3.58%~4.67%,检出限为1×10-4~5×10-4mg/L,该方法简单实用、准确可靠,可用于地表水中酚类化合物的同时测定。     

竹制填料生物接触氧化工艺处理污染河水简

针对受污染的湖溪河水质特征，以传统弹性塑料填料做对比，研究以竹球和竹丝为填料的生物接触氧化工艺，考察填料的挂膜时间、生物量和污水处理效果；确定连续曝气和间歇曝气时反应器的最优运行工况：连续曝气时为HRT=7.5 h，DO=3 mg/L；间歇曝气时为厌氧1.2 h、好氧6.3 h交替运行。实验结果表明，与弹性塑料填料相比，竹制填料挂膜速度快，竹球填料的水处理效果最好；连续曝气最优工况下竹球填料反应器中COD、TN、NH₃-N和TP的平均去除率分别为66.7%、47.9%、57.1%和30.6%；间歇曝气最优工况下竹球填料反应器中COD、TN、NH₃-N和TP的平均去除率分别64.08%、39.95%、60.7%和54.68%；竹制填料可替代传统的塑料填料作为生物接触氧化工艺的载体填料。     

“十三五”期间中国生态环境质量变化特征

以国家生态环境监测网监测结果为基础,总结归纳了"十三五"时期中国生态环境质量变化特征和主要环境问题。结果表明:"十三五"期间,全国生态环境质量全面好转,2020年环境空气优良天数比例比"十二五"末期上升5.8个百分点;地表水总体水质由轻度污染转为良好,Ⅰ～Ⅲ类水质断面比例上升17.4个百分点,劣V类断面比例下降9.0个百分点;酸雨污染程度减轻,海洋等环境要素质量稳中向好。但与此同时,后续改善难度加大,全国仍有40%地级及以上城市空气质量超标,4.8%的国土面积发生酸雨,辽河和海河流域仍是轻度污染,部分河流污染较重,地下水以IV类水质为主,农村饮用水源地和地表水水质均受到不同程度污染,近三分之一国土面积县域生态质量为较差和差。总体来看,当前生态环境质量与人民对美好生态环境的需求和美丽中国目标的实现还有较大差距。逐年上升的能源消费总量和不断增长的汽车保有量,增加了生态环境质量继续改善的压力。     

城市地表水环境质量排名方法研究

基于现行的国家水环境质量评价标准和方法,研究建立了综合反映城市地表水环境质量的城市水质指数CWQI。方法具有普适性、可操作性和可比性,可用于城市地表水环境质量排名。应用于长三角经济圈、珠三角经济圈和京津冀经济圈的相关城市进行排名测算,3个经济圈的城市水质指数呈现不同的分布规律,总体来说长三角经济圈的城市地表水环境质量优于珠三角经济圈和京津冀经济圈。     

地表水环境质量综合评价方法研究与应用进展

水质评价是目前水环境质量管理的重要支撑,水质综合评价方法已经逐渐由断面评价向流域综合评价进行转变与突破。该文对目前的断面水质评价方法进行了归类综述,并且对流域水质综合评价方法及其在各个国家流域的应用进行了重点评述。分析认为中国在流域评价中所使用的"断面比例法"不够准确,缺乏污染物时空分析以及生物评价等问题,并据此提出了未来的研究方向,为未来地表水质评价方法的提升以及水环境管理的完善提供科学的参考依据和建议。     

石英砂滤料表面润湿改性

采用硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂对石英砂进行表面改性,以制备亲油疏水性滤料。研究得出,钛酸酯偶联剂改性石英砂的最佳工艺条件为:偶联剂用量15%,反应温度90℃,搅拌时间15 min;硅烷偶联剂和铝酸酯偶联剂改性石英砂的最佳工艺条件均为:偶联剂用量15%,反应温度110℃,搅拌时间15 min。水对钛酸酯偶联剂改性石英砂滤料的润湿重量由改性前的1.5589 g降低到0.0282 g,水对硅烷偶联剂改性石英砂滤料的润湿重量降低到0.0607 g,水对铝酸酯改性石英砂滤料的润湿重量降低到0.2664 g。静态吸附实验表明,硅烷偶联剂、钛酸酯偶联剂和铝酸酯偶联剂改性石英砂滤料对油的吸附容量分别增加了33.67%、42.87%和22.30%。XPS和FT-IR分析表明,偶联剂均以化学键的方式包覆在石英砂滤料表面,结合稳定。     

城市生态系统复合下垫面碳通量特征——以上海市奉贤大学城为例

随着城市化进程的加速和城市人口规模的增加,城市已成为最大的碳源,研究城市生态系统对大气二氧化碳的贡献成为碳循环研究的焦点问题之一。基于研究区域内土地利用现状和一年的涡动观测系统观测数据,结合地理信息技术(Arc GIS)和通量计算工具(Eddypro及ART Footprint Tool)以及碳通量足迹模型分析了上海奉贤大学城碳通量足迹特征,基于此探讨不同下垫面类型,包括以草本和木本等透水层为主的下垫面(称为自然系统),以建筑物、道路等不透水层为主的下垫面(称为社会系统)碳通量的变化特征。研究结果表明:1)在不同风向上,碳通量贡献区范围随着大气稳定度的增加而扩大。大气处于稳定条件下,非主风向上的碳通量贡献区范围(最大范围1 100 m)比主风向上的碳通量贡献区范围(最大范围780m)要大;当大气处于不稳定条件下时主风向和非主风向下的碳通量贡献区范围相差不大(最大范围分别为321和351m)。2)不同下垫面其源汇特征不同,以绿色植物为主的自然系统年碳通量均值为–4.1μmol/m~2/s,表现为碳汇;社会系统的年碳通量均值为8.6μmol/m~2/s,表现为碳源。3)自然系统的碳通量日变化具有较明显的季节分异,变化特征大致呈"U"型;社会系统的碳通量日变化没有明显的季节分异,变化特征大致呈"M"型。绿色植物对城市生态系统的大气二氧化碳有降低作用,结合自然和社会系统的碳通量变化特征可以为以后合理规划城市布局,建立低碳城市提供服务。     

Does the Temporal Resolution of Precipitation Input Influence the Simulated Hydrological Components Employing the SWAT Model?

This study aimed to evaluate the influence of sub‐daily precipitation time steps on model performance and hydrological components by applying the Green and Ampt infiltration method using the Soil and Water Assessment Tool (SWAT). Precipitation was measured at a resolution of 0.1 mm and aggregated to 5‐, 15‐, 30‐, and 60‐min time steps. Daily discharge data over a 10‐year period were used to calibrate and validate the model. Following a global sensitivity analysis, relevant parameters were optimized through an automatic calibration procedure using SWAT‐CUP for each time step. Daily performance statistics were almost equal among all four time steps (NSE ≈ 0.47). Discharge mainly consisted of groundwater flow (55%) and tile flow (42%), in reasonable proportions for the investigated catchment. In conclusion, model outputs were almost identical, showing simulations responded nearly independently of the chosen precipitation time step. This held true for (1) the selection of sensitive parameters, (2) performance statistics, (3) the shape of the hydrographs, and (4) flow components. However, a scenario analysis revealed that the precipitation time step becomes important when saturated hydraulic conductivities are low and curve numbers are high. The study suggests that there is no need in using precipitation time steps <1 h for lowland catchments dominated by soils with a low surface runoff potential if daily flow values are being considered. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.